 |
"Danish" type grinding mills are having one ball bearing on pulley side and one ball bearing in the other side.
The position of three bearing of our mill are standing in one center, as per below design.
Horse
Power & Output for Grinding
Mill
| Size |
Required
H.P. |
R.P.M. |
Average/Hour |
Size
of Pulley (mm) |
| 400mm
(16") |
5 |
600
to 700 |
90
to 120 kg. |
300
x 125 x 40 |
| 450mm
(18") |
7.5 |
500
to 600 |
250
to 120 kg. |
300
x 125 x 40 |
| 500mm
(20") |
10 |
600
to 700 |
250
to 300 kg. |
375
x 125 x 45 |
| 500mm
(20") |
15 |
600
to 700 |
450
to 600 kg. |
375
x 125 x 45 |
Export
Packing Specification*
| Size |
Dimension |
N.
WT. |
G.
WT. |
| 400
mm |
710
x 660 x 585 mm |
190
kg. |
240
kg. |
| 500
mm |
830
x 730 x 710 mm |
260
kg. |
350
kg. |
Necessary Precautions:
1. When ever you open the mill, clean off the flour which may have coagulated around the fixed stone, so that there remains no possibility of the stone get damaged.
2. Do not grind the stones, without feding into the mill, if you do so, you will make of the stones weaker.
* Note: Mill hopper packing will be given separately as per your instruction.
** Quality can not be explained orally or not on the paper. It can be found after practical use of machine. |
